Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Sähköinen huutokauppa voidaan luoda omana pyyntönään tai aloittaa jo käydyn laajan RFx:n pohjalta uutena kierroksena. Ohjeessa esitellään molemmat vaihtoehdot: 

 

A) Sähköinen huutokauppa omana pyyntönään 

...

Status
colourPurple
titleSourcing

This article only applies to Sourcing

An electronic auction can be created as its own request or can be started as a new round based on an advanced RFx that has already been conducted. Both options are presented in the instructions: 

A) Electronic auction as its own request 

B) Electronic auction based on an already completed request as a new round ( NOTE! Only on the basis of advanced RFx )

 

 

A)

...

Electronic auction at its own request

 

...

The stages of an electronic auction

 

1) Luo huutokauppa, täytä huudettavat kohteet sekä määrittele huutokaupan asetukset

2) Julkaise huutokauppa Tarjouspalveluun 

3) Huutokauppa käynnistyy määriteltynä kellonaikana

4) Seurataan huutokaupan etenemistä (huutokaupparaportti vertailu- tai Excel-näkymässä)

5) Huutokaupan päätyttyä tehdään vertailu sekä toimittajien valinta (sekä mahdollinen hankintapäätös ja -sopimus)

 

Luo huutokauppa

 

Huutokaupan luonti alkaa "Tee uusi ilmoitus" -painikkeella. Valitse "Huutokauppa" sekä huutokaupan kieli ja valuutta. Aloita huutokuapan luonti painikkeella "Luo ilmoitus". Huutokaupat listautuvat huutokauppa -kansioon. 

 

Image Removed

KUVA: Huutokaupan luonti aloitetaan luomalla uusi huutokauppa

 

Huutokauppa -lomakkeisto avautuu.

Syötä välilehdille "Vastuuhenkilöt ja oikeudet" "Yrityksen perustiedot" sekä "Hankinnan kohde" tiedot kuten normaalissa pyynnössä. 

 

 

Arviointiperusteiden määrittely

 

Hankinnan kohde jaettu osiin *

  • Valitse onko hankinnan kohde jaettu osiin
    • Jos valitse kyllä, hankinnan kohteen kriteereihin muodostetaan osa-alueet joihin jokaiseen osa-alueeseen on mahdollista valita oma toimittaja
    • Jos hankinta on jaettu osiin, voidaan sallia osatarjoukset
  • Jos valitset ei, käsitellään hankintaa kokonaishankintana. Hankinnan kohteen kriteerit osioon voidaan luoda ryhmiä, mutta toimittajavalinnan tehdään yhteisesti koko hankinnalle.
    • Jos hankintaa ei ole jaettu osiin, osatarjouksia ei voida sallia

 

Osatarjoukset osa-alueittain sallittu *

  • Mikäli huutokauppaan sisältyy monta eri osaa (osat määritellään hankinnan kohteen kriteerit -välilehdellä), voidaan "Kyllä" -valinnalla sallia, että tarjoaja tarjoaa vain haluamiinsa osiin. 
  • Mikäli kohdassa käytetään valintaa "Ei", on tarjoajan tarjottava kaikkiin osiin. Oletuksena on valinta "Ei".

 

Valintaperusteiden määrittely järjestelmässä

 

Jos et halua näyttää valintaperustetta tarjoajille, klikkaa "Piilota vertailuperuste tarjoajille näytettävässä pyynnössä"

 

Valitse millä perusteella voittaja valitaan: 

  • Halvin hinta
    • vertailutaulukolla vastaus, jolla on halvin hinta, merkitään voittajaksi
    • hankinnan kohteille ei voida asettaa pisteitä
    • hankinnan kohteille ei voida asettaa kriteerejä
  • Kokonaistaloudellinen edullisuus, pisteytys (Halvin hinta)
    • vertailutaulukolla voittajaksi merkitään tarjoaja, jolla on eniten pisteitä
    • hinta sekä laadun numeeriset kriteerit voidaan pisteyttää
  • Korkein hinta
    • vertailutaulukolla vastaus, jolla on korkein hinta, merkitään voittajaksi
    • hankinnan kohteille ei voida asettaa pisteitä
    • hankinnan kohteille ei voida asettaa kriteerejä
  • Kokonaistaloudellinen edullisuus, pisteytys (Korkein hinta)
    • vertailutaulukolla vastaus, jolla on korkein hinta, merkitään voittajaksi
    • hinta sekä laadun numeeriset kriteerit voidaan pisteyttää

 

 

Image Removed

KUVA: Arviointiperusteiden määrittely järjestelmässä

 

 

Huutokaupan aikana tarjoajalle näytettävät sijoitus- yms. tiedot

  • Valitse mitä tietoja tarjoaja näkee huutokauppalomakkeella huutokaupan aikana 
Image Removed

KUVA: Valitaan mitä tietoja tarjoajan huutokauppalomakkeella näytetään

 

Hankinnan kohteen kriteerit

Hankinnan kohteet luodaan osioon, kuten laajassa RFX:ssä muutamia poikkeuksia lukuunottamatta. Tarkemmat ohjeet hankinnan kohteen kriteerit -osion toiminnallisuuksista löydät täältä

 

Hinnan kysynnän muotoa ei huutokaupassa voi muuttaa vaan valintana on aina "Kohteille kysytään hinta ja se vaikuttaa vertailuhintaan". 

  • Syötä huudettavat kohteet, kohteiden määrä sekä yksikkö
  • Aseta jokaiselle kohteelle minimimuutos
    • Kuinka paljon hintaa on vähintään muutettava, jotta huuto tallentuu
  • Aseta jokaiselle kohteelle huutokaupan pohja-arvo
    • Arvo, josta huutaminen aloitetaan
  • Tarvittaessa lisää kohteelle laadullisia numeerisia kriteereitä.  HUOM! valintaperustella halvin hinta ei voida lisätä kriteerejä
    • Lisää kriteerille pisteet

 

Image Removed
KUVA: Kuvassa on huutokaupan määrittely 50 kpl tietokoneita. Hinnasta saatavat maksimipisteet ovat 80. Kannettavalle tietokoneelle on määritelty huutokauppaan huudon vähimmäishinnan muutos, joka on 0,1 € sekä huutokaupan pohja-arvo 500 €

 

 

Sähköinen huutokauppa

 

Sähköinen huutokauppa -osiossa määritellään huutokaupan voimassaoloaika sekä tarjoajille lähetettävän huutokauppakutsun tiedot. Huutokauppakutsu lähtee sähköpostilla huutokaupan julkaisun yhteydessä määriteltyihin tarjoajien sähköpostiosoitteisiin. 

 

Huutokaupan aloitus ja lopetus

 

Määrittele, koska huutokauppa alkaa ja loppuu. Valitse ajankohdat kalenterista tai kirjoita kyseiseen kenttään. 

 

Valitse "Viimeisimmän vastauksen jälkeen odotetaan uusia vastauksia", mikäli haluat, että viimeisen vastauksen jälkeen huutokauppa jatkuu jatkoajalla. Jos valintaa ei tehdä, loppuu huutokauppa heti kun sen määräaika päättyy.

 

Jatkoajan asettaminen

  • Valitse "Viimeisimmän vastauksen jälkeen odotetaan"
  • Aseta X tuntia ja/tai x minuuttia

Jatkoaika on voimassa

  • Valitse "Päivittäin jatkuvasti", mikäli jatkoaika jatkuu yhtäjaksoisesti
  • Valitse "Määrättyinä aikoina", mikäli jatkoajalle halutaan asettaa rajauksia. Nämä rajaukset määrittävät sen, milloin jatkoaika on aktiivinen,
    • Aseta ne viikonpäivät
    • Aseta kellonaika

...

  1. Create an auction, fill in the auction items and define the auction settings

  2. Publish the auction to the Bid Service 

  3. The auction starts at the specified time

  4. Follow the progress of the auction (you can view the auction report in comparison or in an Excel view)

  5. After the end of the auction, a comparison is made leading to a selection of suppliers (as well as a possible sourcing decision and contract)

 

Create an auction

Creating an auction starts by clicking the "Make a new announcement" button. Select "Auction" and the language and currency of the auction. Click the "Create announcement" button to begin the auction. Auctions are listed in the auction folder. 

 

...

IMAGE: Creating an auction is started by creating a new auction

 

When you have created an auction, the full auction form with all details opens.

Enter the information on the tabs "Responsible persons and rights", "Basic company information" and "Procurement object" as you would in a normal request. 

 

Definition of evaluation criteria

Purchase object divided into parts *

  • Select whether the sourcing object is divided into parts

    • If you select yes, sub-areas are formed in the criteria of the sourcing object, where it is possible to choose a supplier for each sub-area

    • If the sourcing is divided into parts, partial bids may be allowed

  • If you select no, the purchase will be treated as a total purchase. Groups can be created in the sourcing items criteria section, but supplier selection is conducted jointly for the entire procurement.

    • If the procurement has not been divided into parts, partial bids cannot be allowed

 

Sub-offers allowed by sub-region *

  • If the auction includes many different parts (the parts are defined on the sourcing items and criteria tab), selecting "Yes" allows the bidder to bid only on the parts he wants. 

  • If you have selected "No" in the section, the bidder must bid for all parts. The default setting is always "No".

 

Defining selection criteria in the system

If you don't want to show the selection criteria to bidders, click "Hide comparison criteria in the request displayed to bidders"

 

Select the basis on which the winner will be selected: 

  • The cheapest price

    • in the comparison table, the answer with the lowest price is marked as the winner

    • points cannot be assigned to sourcing items

    • no criteria can be set for sourcing items

  • The chepeast price, scoring (Cheapest price)

    • on the comparison table, the bidder with the best quality points is marked as the winner

    • price and numerical criteria of quality can be scored

  • The highest price

    • on the comparison table, the answer with the highest price is marked as the winner

    • points cannot be assigned to sourcingitems

    • no criteria can be set for sourcing items

  • The highest price, scoring (Highest price)

    • on the comparison table, the answer with the highest price is marked as the winner

    • price and numerical criteria of quality can be scored

  • Priority

    • a supplier is selected based on your own specific priorities

 

 

...

FIGURE: Defining the evaluation criteria in the system

 

 

Information shown to the bidder during the auction

  • Choose what information the bidder can seeon the auction form during the auction 

...

IMAGE: Select what information is displayed on the bidder's auction form

 

Qualification criteria for the object of acquisition

The sourcing items are created in a section, as in advanced RFX, with a few exceptions. You can find more detailed instructions on the functions of the qualification criteria section  here

 

The format of the price request cannot be changed in the auction, but the choice is always "A price is requested for the items and it affects the reference price". 

  • Enter the objects to be bidded for, the number of objects and the unit

  • Set a minimum price change for each item

    • How much the price must be changed at least in order for the bidto be saved

  • Set an auction base value for each item

    • The value at which to start the auction

  • If necessary, add qualitative numerical criteria for the object.   NOTE! criteria cannot be added to the base if “the cheapest price” is selected as the evaluation criteria

    • Add points to the criterion

 

...

PICTURE: The picture shows the description of the auction for 50 computers. The maximum points for the price are 80. For the laptop, a change in the minimum bid price has been defined for the auction, which is €0.1, and the base value of the auction is €500

 

 

Electronic auction

 

The electronic auction section defines the validity period of the auction and the details of the auction invitation to be sent to bidders. The auction invitation is sent by e-mail to the bidders' e-mail addresses specified in the publication of the auction. 

 

Start and end of the auction

Define when the auction starts and ends. Select the dates from the calendar or write it in the corresponding field. 

 

if you want the auction to continue with an extension after the last answer, select "After the last answer, new answers are expected", . If no selection is made, the auction ends as soon as its deadline expires.

 

Setting extension time

  • Select "Expected after last reply"

  • Set X hours and/or x minutes

The extension is valid

  • Select "Daily continuously", if the extension continues continuously

  • Select "At specified times" if you want to set limits for the extension period. These limits determine when overtime is active,

    • Set those specific days of the week

    • Set the time

...

PICTURE: In the example in the picture, the auction has an extension period of 5 min  , which means that the auction is held on weekdays  from 9:00 a.m. to 3:00 p.m. This means that during the auction period 31.12.2021 - 7.1.2022

...

, the auction will be held on weekdays from 9 am to 3 pm. On weekdays after 3 p.m., a possible new bid is expected for an additional time (5 min)

...

. The auction ends when no one improves their bid during the extension period.

 

 

 

Huutokaupan kulku

  • Määrittele huutokaupan kulku tarvittaessa
  • Lisää huutokauppakutsun lähettäjä
  • Lisää huutokauppakutsun lähettäjän sähköpostiosoite
  • Muuta huutokauppakutsun otsikko tarvittaessa

 

Image Removed

KUVA: Huutokauppakutsu

 

"Liitteet ja linkit" sekä "Allekirjoittajat" -välilehdet täytetään kuten laajassa RFx:ssä. 

 

Esikatsele ja julkaise

 

Esikatselu ja julkaisu -välilehdellä voidaan tarkastella luotua huutokauppaa ja tehdä huutokaupan julkaisu. Välilehdellä on myös mahdollista tulostaa tai tallentaa huutokauppa dokumentti PDF-muodossa tai lähettää dokumentti sähköpostitse esikatseltavaksi.

 

Kun kaikki pakolliset tiedot on syötetty, näkyy jokaisen huutokaupan välilehden kohdalla vihreä oikeinmerkki ja "OK, julkaise" -painike tulee näkyviin.

  • Ennen huutokaupan julkaisua valitaan julkaisukanavat
    • Jos huutokauppa halutaan julkaista julkiseksi Tarjouspalvelu.fi -portaalissa, laitetaan rasti kohtaan "Tarjouspalvelu"
    • Jos huutokauppa halutaan julkaista sähköpostitse vain valituille tarjoajille, laitetaan rasti kohtaan "Lähetä sähköpostitse (syötä osoitteet)". 
      • Tällöin tarjoajille lähtee kutsu sähköiseen huutokauppaan
      • Avautuvaan kenttään syötetään vastaanottajien sähköpostiosoitteet
        • Kukin sähköpostiosoite tulee syöttää omalle rivilleen
  • Kun kaikki halutut julkaisuun liittyvät valinnat on tehty, painetaan "OK, julkaise" -painiketta

 

Huutokauppa

 

Julkaistu huutokauppa siirtyy huutokauppa -kansion alla olevaan "Voimassa olevat" -kansioon. Voimassa olevan huutokaupan tietosivulta huutokaupan perustiedot sekä huutokauppaan osallistuvat tarjoajat. Vastausten vertailu -osiossa pääset tarkastelemaan vertailutaulukkoa. 

 

Huutokauppakutsu

Ennen huutokaupan alkamista, huutokauppakutsua on mahdollista muokata "Huutokauppakutsu -osiossa". 

  • Muokkaa huutokaupan kutsun tietoja ja klikkaa "Tallenna". 
  • Järjestelmä lähettää uuden huutokauppakutsun huutokauppaan osallistuville tarjoajille. 

 

Image Removed

KUVA: Huutokauppakutsu -välilehdeltä pääsee muokkaamaan huutokauppakutsua ennen huutokaupan alkamista.

 

Huutokaupparaportti

Huutokauppa käynnistyy huutokauppakutsuun määritellyn ajan mukaisesti. Huutokaupan etenemistä voidaan seurata huutokaupparaportti-näkymässä. 

 

Punainen = Tarjoaja ei ole ollut kirjautuneena Tarjouspalveluun viimeisen minuutin aikana

Keltainen = Tajoaja on ollut kirjautuneena Tarjouspalveluun viimeisen minuutin aikana, mutta ei ole ollut huutokauppatilassa

Vihreä = Tarjoaja on ollut huutokauppa tilassa viimeisen minuutin aikana

 

Image Removed

KUVA: Huutokaupparaportille pääset kohdasta "Muokkaa vertailua"

 

Kun huutokauppa on päättynyt, se siirtyy päättyneet -kansioon. Ohjeita päättyneen pyynnön hallinnointiin löydät täältä

 

 

B) Sähköinen huutokauppa jo käydyn pyynnön pohjalta uutena kierroksena  

 

Voit aloittaa sähköisen huutokaupan jo käydyn laajan RFx:n pohjalta. Valitse päättyneet kansiosta pyyntö, jonka pohjalta haluat aloittaa huutokaupan. Avaa pyynnön "Kierrokset" -välilehti ja valitse tehdäänkö tarjoajille tiedoksianto vai siirrytäänkö ilman tiedottamista huutokaupan valmisteluun: 

 

...

KUVA: Päättyneen pyynnön "Kierrokset" -osiosta jatketaan tiedoksiantotavan valinnalla huutokaupan laatimiseen. 

...

 

...

  • Valitse seuraavan kierroksen tyypiksi "Huutokauppa". 
  • Valitse seuraavan kierroksen pohja
    • Voit käyttää pohjana itse pyynnön pohjaa tai 
    • tehdä huutokaupan kokonaan tyhjään pohjaan. 
  • Klikkaa "Aloita uusi kierros"

...

 

...

Järjestelmä avaa Huutokaupan lomakkeen. Huutokaupan täyttäminen tapahtuu kuten ohjeen osiossa A) on esitetty. 

...

 

...

Auction process

  • Define the auction flow, if necessary

  • Add the sender of the auction invitation

  • Add the e-mail address of the sender of the auction invitation

  • Change the title of the auction invitation, if necessary

 

...

PHOTO: Auction invitation

 

The "Attachments and links" and "Signatories" tabs are filled in similar to the advanced RFx. 

 

Preview and publish

 

The preview and publish tab allows you to view the created auction and publish the auction. On the tab, it is also possible to print or save the auction document in PDF format or send the document by e-mail for preview.

 

When all required information has been entered, a green checkmark will appear on each auction tab and an "OK, Publish" button will appear.

  • Before the auction is published, publication channels are selected

    • If you want to publish the auction publicly on the http://Tarjouspalvelu.fi portal, put a check mark in the "Tarjouspalvelu" box

    • If you want to publish the auction by e-mail to specific selected bidders, check the box "Send by e-mail (enter addresses)". 

      • In this case, bidders will be invited to an electronic auction

      • The e-mail addresses of the recipients are entered in the field that opens

        • Each email address must be entered on its own line

  • When all the desired publication-related selections have been completed, click the "OK, publish" button

 

Auction

 

The published auction moves to the "Current" folder within the Auction folder. On the information page of the current auction you can find basic information about the auction and bidders participating. In the comparison of answers section, you can view the comparison table. 

 

Auction invitation

Before the auction starts, it is possible to modify the auction invitation in the "Auction invitation section". 

  • Edit the auction invitation information and click "Save". 

  • The system sends a new auction invitation to bidders participating in the auction. 

 

...

IMAGE: The auction invitation tab allows you to edit the auction invitation before the auction starts.

 

Auction report

The auction starts according to the time specified in the auction invitation. The progress of the auction can be monitored in the auction report view. 

  • Red = Bidder has not been logged into the Bid service in the last minute

  • Yellow = Bidder has been logged into the Bidding service in the last minute, but has not been in auction mode

  • Green = Bidder has been in auction mode in the last minute

 

...

IMAGE: You can access the auction report from "Edit comparison"

 

When the auction has ended, it moves to the closed folder. Instructions for managing an expired request can be found  here

 

B) Electronic auction as a new round on the basis of a request that has already been made  

 

You can start an electronic auction based on the advanced RFx that has already been conducted. Select the completed request from the folder, on the basis of which you want to start the auction. Open the "Rounds" tab of the request and choose whether to notify the bidders or proceed without a notification to the preparation of the auction: 

  • Select the service method to prepare the auction. Select “Auction” as the next round type

  • Choose the base of the next round

    • You can use this base or make the auction completely empty

  • Select “Start a new round”

  • The system will open the auction form with all details to be entered

    • The auction is completed as in section A of these instructions above

  • On the “Send by email”section, the emails of suppliers from the previouss round are listed. They will receive the auction invitation by email

Auction report

The auction starts according to the time specified in the auction invitation. The progress of the auction can be monitored in the auction report view. 

  • Red = Bidder has not been logged into the Bid service in the last minute

  • Yellow = Bidder has been logged into the Bidding service in the last minute, but has not been in auction mode

  • Green = Bidder has been in auction mode in the last minute

 

...

IMAGE: You can access the auction report from "Edit comparison"

 

When the auction has ended, it moves to the closed folder. Instructions for managing an expired request can be found  here